PIANO STEINWAY B-211
Steinway B-211 là phiên bản salon grand phổ biến nhất của chúng tôi. Các nhạc sĩ chuyên nghiệp và những tay chơi nghiệp dư nhiều tham vọng đều cảm thấy phấn khích trước sự phong phú của âm sắc tuyệt vời. Model B grand piano là model lý tưởng cho các trường nhạc, phòng thu và trở thành trung tâm âm nhạc tại vô số nhà riêng. Có lẽ sự sở hữu quý giá này sẽ sớm trở thành vật gia truyền của chính gia đình bạn. Một sự thay thế hoàn hảo cho các không gian nhỏ hơn là phiên bản salon A-188 của chúng tôi. Grand piano Model B có sẵn dưới dạng STEINWAY SPIRIO.
XEM THÊM THÔNG TIN STEINWAY B-211
“Một nghệ sĩ mà không có Steinway giống như một ca sĩ mà không có giọng hát.”
Michel Legrand
NGHỆ SĨ STEINWAY
thông số kỹ thuật và thiết kế
KÍCH THƯỚC
Chiều dài: 211cm
Chiều rộng: 148 cm
Chiểu cao: 102 cm
Trọng lượng: 354 kg
BRACES (THANH GIẰNG)
4 thanh giằng rắn được làm từ gỗ vân sam với thể tích 32,686 cm3, làm tăng cường độ chịu lực kéo với trọng lượng thấp. Các chốt gỗ Maple đóng chắc các thang giằng với vành đàn và crossblock, tạo nên một khối vững chắc và nâng đỡ cho các bộ phận khác được thiết kế để tạo âm thanh
SCALE
Overstrung; combination agraffe; Front AND rear duplex. Tension: 39,047 lbs. (17,571 kg)
RIBS (KHUNG SƯỜN)
Được làm từ gỗ thông chắc chắn để đảm bảo sự hỗ trợ mạnh mẽ và truyền sự chuyển động của âm thanh liên tục từ dây đến soundboard. Phần đầu của khung sườn được đặt thủ công.
TUNING PINS (CHỐT LÊN DÂY)
Thép không ghỉ cao cấp, đầu chốt được mạ niken.
STRINGS (DÂY ĐÀN)
Treble: Twelve whole & one-half sizes từ thép cường độ cao của Thụy Điển. Bass: Lõi dây bằng thép. Chiều dài nhất của dây: Agraffe/bridge (ngựa đàn): 151 cm
HAMMERS (CÁC BÚA GÕ)
Trên là dưới lớp nỉ được bọc len cao cấp; được xử lý để chống lại côn trùng và độ ẩm. Đầu búa được nén chắc để duy trì hình dáng búa. Thân và mép Búa đàn được làm từ gỗ Hard rock Maple.
DAMPERS
Len cao cấp được cắt dọc làm tăng hiệu quả của damper với phần đầu bằng gỗ maple cho sự ổn định lâu dài.
KEYS (CÁC PHÍM)
Cây vân sam từ Bavarian, được chế tạo cho riêng nó. Lớp phủ chống sứt mẻ, chống những vết bẩn tự nhiên bám vào phím; Chống trượt, được đánh bóng tinh tế. Các nút gỗ Linden siêu bền củng cố các phím trên ray, giúp phím đàn chịu được sức mạnh tối đa cho mỗi lần đánh. Độ dài nhất của phím: 21” (53,3 cm).
KEYBED
Được cấu tạo từ những tấm gỗ spruce. Gỗ có vân ngang được ghép với nhau ở phần thân Bệ, phần bo tròn của Bệ phím được các tấm gỗ có vân gỗ dọc nối với nhau, tạo thành một hệ thống thông hơi cho độ ẩm, do đó, tùy vào trường hợp mà các vân gỗ có thể mở rộng hoặc co thắt khi cần thiết. Thiết kế quan trọng này cũng làm tăng cường sự chuyển động của các phím đàn và ngăn những âm thanh “chát” khi chơi với âm lượng lớn. Chốt bệ phím cũng được làm từ gỗ maple mang lại tính gắn kết vững chắc và đồng điệu. Độ dày bệ phím: 1¾” (4.45 cm).
PEDALS
Cấu tạo bằng đồng rắn.
Bao gồm các pedal soft, sustaining và full sostenuto.
The one-piece continuous bent rim, 2¾" thick, is one of the most significant technical innovations in piano building. The rim provides the foundation for the beauty, stability, and quality of each Steinway grand piano. The rim of the Steinway Model B is comprised of 16 layers of hard rock maple — with both inner and outer rim being pressed together in a single operation — which provides the structural integrity that enables a Steinway piano to endure for generations. This unique rim construction has been an integral part of every Steinway grand piano since it was developed and patented by Steinway & Sons in 1878.
The soundboard lies at the heart of a Steinway grand or upright piano, which is why great care is needed both in its design and in the selection of the wood. To meet the highest quality standards, only superior Sitka spruce with a regular grain and prescribed minimum number of annual growth rings is acceptable. The production of the Steinway Diaphragmatic Soundboard is based on a 1936 patent to achieve optimum performance in dynamic range and maximum sustain. Under this patent, the soundboard is gradually tapered from the center to the edge, permitting freedom of movement and creating a sound of unparalleled richness, sonority, and sustain.
Created like the soundboard of violins to give a free and even response throughout the entire scale, the Steinway Model B soundboard is 9 mm thick in the center and tapers to 6 mm as it approaches the rim and outer case before being double crowned. The design permits complete freedom of movement while displacing a greater amount of air, creating a richer and more lasting tonal response. Close-grained, quarter-sawn Sitka spruce — which has unusual stability and vibrance under stress and vibration — is used exclusively for the soundboard.
The better the materials, the better the sound. Steinway & Sons constructs its soundboard bridges exclusively from vertically laminated hardwood with a horizontal grain, capped with solid maple. Each bridge is notched by hand for precise, individual string-bearing. This design ensures optimal sound transmission from the strings to the soundboard, resulting in a sustained, resonant tone—creating the inimitable Steinway Sound. In 1963, Steinway introduced the Hexagrip Pinblock, which is engineered to enable pianos to hold their tuning longer and with incredible precision.
The Hexagrip patented design features 7 laminations of quartered hardrock maple stock. Grain is symmetrically distributed at successive angles of 45º and 90º, employing uniform grain direction around the circumference of the tuning pin to provide ultimate pin grippage. The exclusive design provides the tuning pin with smoother movement under torque, a more uniform retaining action, and a piano that holds its tuning longer.
Treble bridges are hard rock maple vertical laminations capped with solid hard rock maple; they are planed, graphite coated, drilled and notched by hand for precise individual string bearing, with a design that defies splitting. Bass bridges are continuous with treble and maple doweled.
Up to 20 tons of string tension is being exerted within a piano at all times. It is the function of the cast iron plate to accommodate this extraordinary force and provide strength and stability throughout the life of the piano. Steinway & Sons uses its own “bell-quality” casting to support this string tension and reduce vibration, which in turn enhances the sound. This component is so integral to the construction of a Steinway piano that Steinway & Sons owns and operates its own foundry, which produces cast iron plates to its exacting specifications. The plate is sturdy gray iron; filled CNC–milled, and sealed; bronzed and lacquered.